Starting second skinning layer
Today I started the second layer of skin on the fore part of the boat. It’s a little tougher to work on the peak of the boat. I had to […]
Monthly Archives: April 2013
Video from my Ignite talk
I was honored to be asked to give a talk at Ignite San Francisco in December. It was the first time I had “come out” about the building of this […]
First thin plank layer is done
This initial fore layer was started with 1/6 inch marine ply cut into 2 inch strips. I used one single side tapered piece for each 12 inch section to help […]
Switching to thinner plywood for the next planks
Midship was easy, but the fore and aft of the boat are very curvy. For the aft I used 1/2 inch plywood cut into 1 1/2 inch strips. I had […]
Tsunamiball 